Cut back stucco 3" to allow replacement of existing step flashing.
Price
$300.00
Module 4 Labour Description:
Type of Roofing Application
Ridge Capping Installation
Area (sq.ft.)
200
Material to be used
HP Rapid Ridge
General Scope of Work
Not Applicable
Price
$0.80
Module 5 Labour Description:
Type of Roofing Application
Starter Strip Installation
Area (sq.ft.)
200
Material to be used
Not Applicable
General Scope of Work
Not Applicable
Price
$0.80
Module 6 Labour Description:
Type of Roofing Application
Cap Flashing Installation
Area (sq.ft.)
80
Material to be used
Standand Gauge
General Scope of Work
Standing Seam Cap Flashing
Price
$3.00
Summary by Module
Qty
Price
Extended
Module 1: Laminate Shingle Installation
3000
0.80
2400.00
Module 2: Torch On Application
1000
3.00
3000.00
Module 3: Cut Stucco
1
300.00
300.00
Module 4: Ridge Capping Installation
200
0.80
160.00
Module 5: Starter Strip Installation
200
0.80
160.00
Module 6: Cap Flashing Installation
80
3.00
240.00
Total Project Cost
$6260.00
Material Delivery
Roof Top
Disposal Bin Placement
Close: Throwing Distance
Existing Roof Deck
Plywood
Number of Skylights
6
Number of Chimneys
2
Does this project require Built-in Gutters?
No
What is the Pitch of Roof?
5/12
Number of Old Layers to be Removed?
1
Project Notes (Details)
This home is a one storey rancher home located in rural Richmond. Home owners require special consideration to help protect their gardens from falling roofing debris.
Project Photos
Rancher Home View Larger Image This is the front of the home. The disposal bin will be placed in the driveway so that the material can be thrown in directly from the roof.
Flat Roof View Larger Image This is the flat roof section which need to be removed and replaced with new. There are 4 skylights to strip around and 60 ft. of metal capping to replace.
Pitched Roof Sections View Larger Image As seen here the pitch is a walkable 5/12. The existing shingles are T-Lock and will be replaced with laminated shingles. Deck is plywood.
Stucco Work Image View Larger Image The white stucco does not allow access to the existing step flashing. In order to install new flashing this stucco must be cust back by 3".
